dom > Lista produktów > SPAWACZE > Spawarki TIG >

Spawarka Inverter dc ac tig do lekkich urządzeń przemysłowych Master tig-300ac

Spawarka Inverter dc ac tig do lekkich urządzeń przemysłowych Master tig-300ac

Spawarka Inverter dc ac tig do lekkich urządzeń przemysłowych Master tig-300ac
Spawarka Inverter dc ac tig do lekkich urządzeń przemysłowych Master tig-300acSpawarka Inverter dc ac tig do lekkich urządzeń przemysłowych Master tig-300acSpawarka Inverter dc ac tig do lekkich urządzeń przemysłowych Master tig-300acSpawarka Inverter dc ac tig do lekkich urządzeń przemysłowych Master tig-300acSpawarka Inverter dc ac tig do lekkich urządzeń przemysłowych Master tig-300ac
Katalog produktówSpawarki TIG
album ze zdjęciamiView Larger
English detailsInverter dc ac tig welder for light industrial Master tig-300ac
markiTOPWELL
Specyfikacja produktuMASTERTIG-300AC
Znamionowe napięcie wejściowe3PH ~ 400V ± 15%
Znamionowe wyjście300A / 22V
Maksymalne napięcie obwodu otwartego9,13 kVA
Prąd spawania / zakres napięcia5A / 10,2V ~ 300A / 22V
Współczynnik mocy0,85
Efektywność85%
KolorCzerwony
Gwarancja1 rok gwarancji
Wymiary550 x 230 x 440 mm
Waga23 KG
portSzanghaj / Ningbo
płatnośćL/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal
Pobierz dokument
Zaktualizowano2019-11-22
Aby uzyskać więcej informacji
  • MASTERTIG-300AC


    The total solution of TIG welding

    • Application:

      Metal Fabrication
      Maintenance and Repair
      Auto Body
      Light Industrial
    • Processes:

      DC TIG (GTAW)
      AC TIG (GTAW)
      MIX TIG (GTAW)
      Stick (SMAW)
    • Input Power: 340-460V, 3-Phase 

      Amperage Range: 5-300A
      Rated Output at 40℃ (104℉):
      300A at 22V @60% Duty Cycle
      Weight: 30kg

       

    PULSED TIG

    Conventional Pulsed TIG

    Typically from 0.2 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and can increase overall control of the weld puddle.

    High Speed Pulsed TIG

    In excess of 40 PPS, Pulsed TIG becomes more audible than visible—causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds — between a high Peak and a low Background amperage — can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds.

    AC waveshape

    Standard Square Wave

    The Standard Square Wave offers fast transitions between EN and EP for a responsive, dynamic, and focused arc with better directional control. It forms a fast-freezing puddle with deep penetration and fast travel speeds.

    Sine Wave

    The Sine Wave a soft arc with the feel of a conventional power source. It provides good wetting action and actually sounds quieter than other waves. Its fast transition through the zero amperage point also eliminates the need for continuous high frequency.

    MIX TIG CONTROL

    Features of MIX TIG:

    The AC current can get a very good clearance, and DC current can get a deeper penetration.
    Use the MIX TIG we can get an excellent Arc Concentration,

    can be carried out the excellent welding performance from thin to thick plate.

    1) Nice weld appearance, deep penetration.

    2) Excellet Arc Concentration..

    3) Substantially reduce the electrode consumption.

    MIX TIG Frequency (Hz):

    the cycle time of MIX

    TIG in 1 second. Adjustable range: 0.1-10Hz.

    MIX TIG Balance (DC) %:

    DC Balance (%) = (tad/Tmix) x 100

    AC Waveshape Controls

    Frequency control

    Controls the width of the Controls the width of the arc cone.

    Increasing the AC Frequency provides a more focused arc with increased directional control.

    Note: Decreasing the AC Frequency softens the arc and broadens the weld puddle for a wider weld bead.

    AC Balance Control

    Controls arc cleaning action. Adjusting the % EN of the AC wave controls the width of the etching zone surrounding the weld.

    Note: Set the AC Balance control for adequate arc cleaning action at the sides and in front of the weld puddle. AC Balance should be fine tuned according to how heavy or thick the oxides are.

    Amplitude Control

    Adjusts the ratio of EN to EP amperage to precisely control heat input to the work and the electrode.

    EN amperage controls the level of penetration, while EP amperage dramatically effects the arc cleaning action along with the AC Balance control.


       

  •  

    Item No MASTIER TIG-300AC
    Rated Input Voltage 3PH ~ 230V ±15%
    Max. Load Power Capacity TIG: 9.13KVA
      MMA: 10.38KVA
    Rated Duty Cycle(40oC) 60% TIG: 300A/22V
      MMA: 250A/20V
    100% TIG: 250A/20V
      MMA: 200A/28V
    Welding Current/Voltage Range TIG: 5A/10.2V~300A/22V
      MMA:20A/20.8V~250A/30V
    Open Circuit Voltage 70V~80V
    Power Factor 0.8
    Efficiency 80%
    TIG Pulse Peak Current 5A~250A
    Pulse Frequency 0.2Hz~200Hz
    Pulse Width (Ratio) 1~100%
    AC TIG AC Frequency Range 20Hz~250Hz
    AC Clean Width (AC Balance) +40~-40
    AC Clean Ratio (AC Bias) % +30~-50
    MIX TIG MIX Frequency: 0.1Hz~5Hz
    DC Balance: (%) 20-80
    Arc-starting Current 5A~300A
    Crater-filling Current 5A~300A
    Current Up-slope Time 0.1S~15S
    Current Down-slop Time 0.1~15S
    Pre-Gas Time 0.1S~15S
    Flow-Gas Time 0.1S~15S
    Spot Arc Time 0.1S~10S
    MMA Arc Force 10A~200A
    Hot Start Time 0.1-3S
    Hot Start Current 10A-200A
    Dimension (LxWxH) 550X230X440mm
    Weight (KG) 30KG

    Water-cooling Unit: WC-100

    Operating Voltage 230V 50/60Hz
    Rated Power 260W
    Cooling Power 1.5KW(1L/MIN)
    Maximum Pressure 0.3MPA/60HZ
    Recommended Cooling Liquid 20%~40% ethanol/water
    Tank Volume 6.5L
  • For Standard accessories
    3

      

      

    TIG torch:TIG-26


      

      

    Electrode holder with cable 2M
    Earth clamp with cable 2M

    For Optional accessories
    3

      

      

    BINZEL ABITIG ® GRIP 26


      

      

    Argon gas regular


      

      

    Trolley:WT-100


      

      

    Foot Pedal


      

      

    Water-cooling unit: WC-100

  • Q:Are you a factory or a trading company?

    A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.

    Q:How can I pay my order?

    A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.

    Q:How about your warranty?

    A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.

    Q: Do you have a CE certificate?

    A: For every model of machine, it has a CE certificate.

    Q:How can I get the quotation?

    A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly

Proszę o przesłanie informacji

ZOSTAŃMY W KONTAKCIE

Otrzymuj powiadomienia o ofertach sprzedaży i nie tylko

PODĄŻAJ ZA NAMI

Chcemy usłyszeć od ciebie!